Toyota Highlander guide Owner'S Manual Download Page 156

Page: 156 / 499

154

3-3. Adjusting the seats

HIGHLANDER_AE (OM48F11E)

Second seats

Third seats

■

Adjusting the height of the head restraints (except third seats)

■

Adjusting the third seat head restraints

Always raise the head restraint one level from the stowed position when
using.

Align the head restraint with the installa-
tion holes and push it down while press-
ing the lock release button.

Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.

WARNING

■

Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.

●

Use the head restraints designed for each respective seat.

●

Adjust the head restraints to the correct position at all times.

●

After adjusting the head restraints, push down on them and make sure
they are locked in position.

●

Do not drive with the head restraints removed.

Lock release button

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands