Toyota Highlander guide Owner'S Manual Download Page 12

Page: 12 / 499

HIGHLANDER_AE (OM48F11E)

WARNING:
Explains something that, if not obeyed, could cause death or
serious injury to people.

NOTICE:
Explains something that, if not obeyed, could cause damage to
or a malfunction in the vehicle or its equipment.

Indicates operating or working procedures. Follow the steps
in numerical order.

Indicates the action (push-
ing, turning, etc.) used to
operate switches and other
devices.

Indicates the outcome of an
operation (e.g. a lid opens).

Indicates the component or
position being explained.

Means “Do not”, “Do not do
this”, or “Do not let this hap-
pen”.

Reading this manual

1 2 3

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Owner'S Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands