manualshive.com logo in svg

Toyota Highlander guide, Owner'S Manual

The Toyota Highlander Guide is a comprehensive manual designed to assist Highlander owners in quickly accessing vital information about their vehicle. This Quick Reference Manual is available for free download from manualshive.com, allowing users to easily access the manual to maximize their Highlander's performance and features.

Share
Download
background image

374

6-3. Do-it-yourself maintenance

HIGHLANDER_AE (OM48F11E)

Turn clockwise and secure
the bulb base.

Install the connector.

Shake the connector gently to
check that it is not loose, turn
the front fog lights on once and
visually confirm that no light is
leaking through the mounting.

When installing the fender liner, install by conducting 

 with the

directions reversed.

Make sure that the fender liner is attached to the inside of the bumper.

5

6

7

1

NOT FOR REPRODUCTION

Summary of Contents for Highlander guide




















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Highlander guide

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
Yakima K618 Instructions Manual preview
K618
Brand: Yakima Pages: 11
Kuda 079020 Installation Instruction preview
079020
Brand: Kuda Pages: 2
Safe Fleet PRIME DESIGN URX-001-E Manual preview
PRIME DESIGN URX-001-E
Brand: Safe Fleet Pages: 8
Nav TV Ford 4” UNI-CAM Manual preview
Ford 4” UNI-CAM
Brand: Nav TV Pages: 6
Saab 2007 9-3 Remote Starter Owner'S Manual preview
2007 9-3 Remote Starter
Brand: Saab Pages: 304
ACV 281178-28G-M Installation Manual preview
281178-28G-M
Brand: ACV Pages: 2
Oldsmobile 2000 Oldsmobile Intrigue Owner'S Manual preview
2000 Oldsmobile Intrigue
Brand: Oldsmobile Pages: 348
ULTIMATE SPEED 285690 Assembly And Safety Advice preview
285690
Brand: ULTIMATE SPEED Pages: 10
ROADGEAR RGABM1 User Manual & Fitting Instructions preview
RGABM1
Brand: ROADGEAR Pages: 2
MBRP 0130717 Assembly preview
0130717
Brand: MBRP Pages: 5
Edelbrock Turbocharger 15012 Installation Instructions preview
Turbocharger 15012
Brand: Edelbrock Pages: 1
GMC Yukon XL Denali 2015 Owner'S Manual preview
Yukon XL Denali 2015
Brand: GMC Pages: 439
Magneti Marelli BCF636 Installation Instruction preview
BCF636
Brand: Magneti Marelli Pages: 2
Mazda 2014 CX-9 User Manual preview
2014 CX-9
Brand: Mazda Pages: 604
Yakima TopWater Quick Start Manual preview
TopWater
Brand: Yakima Pages: 9
Dodge 2008 Dakota Owner'S Manual preview
2008 Dakota
Brand: Dodge Pages: 439

Brands by name

Popular brands

Load more brands