Toyota Display Audio system Owner'S Manual Download Page 381

Page: 381 / 945

1-3. Adjustable components (seats, mirrors, steering wheel)

Before driving

CAUTION

■

When the seatback is folded/the bottom cushion is raised

Do not sit on or place anything on the seatback or auxiliary box while driving.

■

When returning the seats to their original position

Observe the following precautions. Failure to do so may result in death or
serious injury.

●

Be careful not to get your hands or feet pinched in the seat.

●

Make sure the seatbacks and bottom cushions are securely locked. Fail-
ure to do so will prevent the seat belt from operating properly.

●

Check that the seat belts are not twisted or caught under the seat.

●

Arrange the seat belts in the proper positions for ready use.

NOTICE

■

Before folding the seats

The seat belts buckles must be stowed.

Summary of Contents for Display Audio system


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Display Audio system

Reviews:

Related manuals for Display Audio system

Brands by name

Popular brands

Toyota Display Audio system, Owner'S Manual

Search results

Summary of Contents for Display Audio system

Reviews:

Related manuals for Display Audio system

Brands by name

Popular brands