Toyota Display Audio system Owner'S Manual Download Page 277

Page: 277 / 945

168

1. BASIC INFORMATION BEFORE OPERATION

Touch

next to the desired entry

on the “Contacts” screen.

Entry options screen of the “Stored” and
“Speed Dials” list

Entry options screen of the “Phone
Book” list

”

On this screen, the following functions can
be operated.

Touch

“Rename XX”

on the entry op-

tions screen.

Input the entry name.

Touch

“OK”

DISPLAYING AND EDITING
THE ENTRY INFORMATION

Detailed information of entries in the
list can be displayed or edited.

No.

Function

Touch to display the details of
the entry information.

•

Touch the desired entry to call
it.

Touch to change the entry name.
(See page 168.)

Touch to edit phone numbers.
(See page 169.)

Touch to delete the entry.

Touch to delete all entries.

Touch to register the entry in the
“Stored” list on the “My Destina-
tions” screen and “Contacts”
screen. (See page 166.)

INFORMATION

●

“Rename XX”

and

“Edit Phone Num-

bers”

cannot be operated while driving.

CHANGING THE ENTRY NAME

Summary of Contents for Display Audio system


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Display Audio system

Reviews:

Related manuals for Display Audio system

Brands by name

Popular brands

Toyota Display Audio system, Owner'S Manual

Search results

Summary of Contents for Display Audio system

Reviews:

Related manuals for Display Audio system

Brands by name

Popular brands