Toyota Display Audio system Owner'S Manual Download Page 197

Page: 197 / 945

2. ENTUNE SERVICE

PL
IC

-T

E
O

ER
S

Touch

“Dest”

on the map.

Touch

“Enter Destination”

”

The “Enter Destination” screen can be dis-

played by touching

on any of the

“Navigation” screens.

Touch

“POI”

on the “Enter Destina-

tion” screen.

Touch

“Fuel Prices”

on the “POI”

screen.

”

When the login information screen is dis-
played, enter the user login information
and then touch

“Confirm Login Informa-

tion”

. (See page 80.)

”

When the cost warning or roaming warn-
ing screen is displayed, touch

“Con-

tinue”

. This function can be set to on or

off. (See page 208.)

Touch

for the desired item.

”

On this screen, the following functions can
be operated.

”

If you touch the desired item, the starting
route guidance screen will be displayed
directly. (See page 42.)

Touch

“Calculate”

The starting route guidance screen will
be displayed. (See page 42.)

FUEL PRICES

It enables the navigation system to dis-
play current fuel prices and gas station
locations, which can be set as a desti-
nation if desired.

Before using this function, connect a

Bluetooth

phone with an internet pro-

file. (See page 203.)

No.

Function

Touch to display search result list
sorted by company brand.

Touch to display search result list
sorted by the price.

Touch to display search result list
sorted by the distance.

Touch to select the desired fuel
type.

”

When

“Save”

is touched, the point is

registered in the “Stored” list on the “My
Destinations” screen. (See page 54.)

”

When

is touched, the registered

telephone number is called.

Summary of Contents for Display Audio system


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Display Audio system

Reviews:

Related manuals for Display Audio system

Brands by name

Popular brands

Toyota Display Audio system, Owner'S Manual

Search results

Summary of Contents for Display Audio system

Reviews:

Related manuals for Display Audio system

Brands by name

Popular brands