Toyota Corolla 2007 Operating Manual Download Page 192

Page: 192 / 295

’07 Corolla_U (L/O 0608)

184

2007MY COROLLA from Oct. ’06 Prod. (OM12B32U)

This illustration indicates typical tire
symbols.

1. Tire size—For details, see “—Tire

size” on page 188.

2. DOT and Tire Identification

Number (TIN)—For details, see
“—DOT and Tire Identification
Number (TIN)” on page 187.

3. Uniform tire quality grading—

For details, see “Uniform tire quali-
ty grading” that follows.

4. The location of the tread wear

indicators—For details, see
“Checking and replacing tires” on
page 261.

5. Tire ply composition and mate-

rials—Plies mean a layer of rub-
ber−coated parallel cords. Cords
mean the strands forming the plies
in the tire.

6. Radial tire or bias−ply tires—A

radial tire has “RADIAL” on the
sidewall. The tire not marked with
“RADIAL” is a bias−ply tire.

Tire information—
—Tire symbols (standard tire)

Summary of Contents for Corolla 2007








































































































































































































































































































Search results

Summary of Contents for Corolla 2007

Reviews:

Related manuals for Corolla 2007

Brands by name

Popular brands

Toyota Corolla 2007, Operating Manual

Search results

Summary of Contents for Corolla 2007

Reviews:

Related manuals for Corolla 2007

Brands by name

Popular brands