Toyota Corolla 2007 Operating Manual Download Page 174

Page: 174 / 295

’07 Corolla_U (L/O 0608)

166

2007MY COROLLA from Oct. ’06 Prod. (OM12B32U)

To open the glove box door, pull the
lever.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box door
closed while driving.

Type A

Type B

Type C

To use the box, pull on the handle.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the auxiliary box
closed while driving.

Do not use the auxiliary box as an
ashtray.

Glove box

Auxiliary boxes

Summary of Contents for Corolla 2007








































































































































































































































































































Search results

Summary of Contents for Corolla 2007

Reviews:

Related manuals for Corolla 2007

Brands by name

Popular brands

Toyota Corolla 2007, Operating Manual

Search results

Summary of Contents for Corolla 2007

Reviews:

Related manuals for Corolla 2007

Brands by name

Popular brands