Toyota 8FBE18T, Operator'S Manual

Page: 7 / 53

En
7
GENERAL SCREEN
1. Travel 2nd speed control set switch
2. Power selection switch
3. Time or date selection switch
4. Meter mode selection switch
5. Multiple screen display area
6. OPS indicator
7. Parking brake indicator
8. Over load indicator
9. Height limiter indicator
10. Travel 2nd speed setting indicator
11. Diagnostic mode indicator
12. Overheat warning indicator
Travel 2nd speed control set switch
Press switch (1) to switch the activation the travel 2nd
speed setting function. The travel 2nd speed setting
indicator informs of its activation.
Power selection switch
Press switch (2) on the general screen to change the
traveling/material handling power select mode.
Enclosing all of "SPH" indicates that the original mode
is selected.
1 2 3 4
5 6
7
8
9
10
11
12
switch (1)
Travel 2nd speed setting indicator
switch (2)
power select indicator
Time or date selection switch
Press switch (3) on the general screen to switch the
date and time display.
Meter mode selection switch
Press switch (4) to switch the hour meter display.
OPS indicator
This indicator lights when the operator leaves the seat
with the parking brake released, and the buzzer sounds
for one second.
This is not available before “hour meter start”.
Parking brake indicator
This indicator lights while the parking brake is in oper-
ation. Parking brake indicator keeps lighting and
buzzer sounds when the operator attempts to travel
without releasing the parking brake. Before traveling,
check that the parking brake indicator has gone out.
Caution Caution Caution
If the indicator does not go out when the parking
brake is released, stop operating the vehicle and
have it inspected at a Toyota dealer.
switch (3)
date / time display
switch (4)
(En-6)