41
En
LUBRICATION CHART (4W)
1.
Mast strip
2.
Tilt cylinder front pin
3.
Mast support bushing
4.
Lift chain
5.
Drive unit
6.
Brake pedal link
7.
Rear axle beam front pin
8.
Oil tank
9.
Tilt steering lock mechanism
10. Swing lock cylinder crank and rod pin
11.
Steering knuckle king pin
12. Rear wheel bearing
13. Tie rod end pin
14. Rear axle cylinder end pin
15. Rear axle beam rear pin
16. Wet disc brake
17. Side Shifter (OPT)
I)
Inspect every 8 hours (daily)
II)
Inspect every 40 hours (weekly)
III) Inspect every 250 hours (6-weeks)
IV) Inspect every 1000 hours (semi-annually)
V)
Inspect every 2000 hours (annually)
VI) Inspect every 3000 hours (1.5 years)
{
Inspection and supply
z
Replacement
*
Located both right and left
A)
MP Grease
B)
Motor oil
C)
Gear oil (ATF type T-IV)
D)
Hydraulic oil (ISO VG32)
E)
Molybdenum disulfide grease
F)
ATF type T-IV
Note:
In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.
(En-40)
Summary of Contents for 8FBE18T
Page 1: ......
Page 53: ...53 En En 52...
