Toyota 8FBE18T, Operator'S Manual

Page: 25 / 53

En
25
Battery hood - opening
8FBET15, 8FBEKT16, 8FBEKT18, 8FBEMT15
1. Set the mast in the vertical position.
2. Tilt the steering column forward to the foremost
position (through steering column lock lever).
3. Move the seat forward to the foremost position.
Incline the seat back forward to the foremost
position.
4. Move the armrest forward to the foremost posi-
tion
Pull the armrest up at the upmost position.
Slide the armrest up.
5. Remove the battery hood catch.
6. Fully open the battery hood and hold it until
checking that the battery hood is locked securely.
8FBET16, 8FBET18, 8FBET20
8FBEMT16, 8FBEMT18, 8FBEMT20
1. Set the mast in the vertical position.
2. Tilt the steering column forward to the foremost
position (through steering column lock lever).
3. Move the seat forward to the foremost position.
4. Move the armrest back to the backmost position
Pull the armrest up at the upmost position.
Slide the armrest up.
5. Unlock the battery hood catch.
6. Fully open the battery hood and hold it until
checking that the battery hood is locked securely.
8FBET16, 8FBET18, 8FBET20
8FBEMT16, 8FBEMT18, 8FBEMT20
with Fork Pockets or Swivel Seat options
1. Set the mast in the vertical position.
2. Tilt the steering column forward to the foremost
position (through steering column lock lever).
3. Move the seat forward to the foremost position.
4. Move the armrest back to the backmost position
Push the armrest down at the downmost position.
Slide the armrest up.
5. Remove the battery hood catch.
6. Fully open the battery hood and hold it until
checking that the battery hood is locked securely.
2 3 4 6
5
2 3 4 6
2
3
4
6
Battery hood - closing
Lift the battery hood and press the damper stay lock
release button. Check that the battery cable is kept in
the cable guard and then close the battery hood, lock-
ing the catch. Pull the steering column back to the orig-
inal position.
Caution Caution Caution
Operating the vehicle without firmly locking the
battery hood is very dangerous. Be sure to check
that it is firmly locked before operating the vehicle.
Fork
Lift each fork stopper and unlock so that the forks can
be shifted left and right. Adjust the forks in the posi-
tion most appropriate for the load.
When adjusting the forks, make sure that the center of
gravity of the load corresponds to the center of the
vehicle. After adjustment, turn the stoppers to lock the
forks in place
Draw bar
The draw bar is located at the back of the weight, and
is used to pull the vehicle out if its tires drop into a gut-
ter or become stuck in mud. The draw bar can also be
used for loading the forklift onto another truck or vehi-
cle.
Never use the draw bar for towing the vehicle.
3W model
4W model
(En-24)