Toyota 8FBE18T, Operator'S Manual

Page: 11 / 53

En
11
Date and time display
Press switch (3) in the general screen, the date and
time are displayed alternately.
Operation procedure
The year, month, day, time and 12/24-hour display can
be set. Press switch (3) on the general screen for more
than two seconds, and Clock set screen is displayed.
Functions of switches on the clock set screen:
Switch (1): exit (not set)
Switch (2): decrease the selected (blinking) value.
Switch (3): Increase the selected (blinking) value.
Switch (4): Enter the selected (blinking) value and pro-
ceed to the next item.
Pressing switch (4) while “MINUTES” is selected can
complete setting and the screen returns to the general
screen.
switch(1) switch(2) switch(3) switch(4)
Multi meter display screen
Press switch (4) on the general screen, the display
changes over in sequence of Key-ON hour meter, Lap
time meter -> Traveling hour meter, Material handling
hour meter, Traveling/Material handling hour meter ->
odometer, trip meter -> Maintenance hour meter ->
general screen.
(1) Key switch on hour meter (KEY ON)
It counts the time when the key switch is turned on.
(When logged on for models with PIN code entry sys-
tem.)
(2) Lap time meter (LAP)
It counts the time when the key switch is turned on.
(When logged on for models with PIN code entry sys-
tem.)
Pressing switch (1) for more than two seconds can
reset the meter.
(3) Drive motor service
hour meter
It counts the time when the drive motors are activating
on the power running mode or regenerative brake
mode. (Not when the drive motors are freewheeling).
(4) Pump motor service hour meter
It counts the time when the pump motor is activating
on the power running mode for the material handling
operations. (Not when the motor is activating only for
the power steering).
(5) Drive / pump motors service hour meter
It counts the time when the drive or pump motor are
activating on the power running mode or regenerative
brake mode. (Not either when the drive motors are
freewheeling, or when the motor is activating only for
the power steering).
(6) Odometer (ODO)
It counts the traveling distance of the vehicle.
(7) Trip meter (TRIP)
It counts the travel distance, and it can be reset. Press-
ing switch (1) for more than two seconds can reset the
meter.
(8) Planned maintenance hour meter
The preset service interval time and the current elapsed
time are displayed.
(En-10)