Toyota 2015 4Runner Service Manual Download Page 127

Page: 127 / 524

127

3-3. Adjusting the seats

Op
eration

f each

compo

nen

4RUNNER (U)_(OM35B18U)

■

Getting in the vehicle (right side only)

Pull up the lever and fold down
the seatback. The seat will slide
forward.

Move the seat to the front-most
position.

■

Getting out of the vehicle (right side only)

Lift the lever on the back of the
seatback and fold down the
seatback. The seat will slide
forward.

Move the seat to the front-most
position.

■

After passengers have entered/exited the vehicle

Lift up the seatback and slide the seat backward until it locks.

Moving a second row seat for access to the third row seats (vehicles
with third row seats)

Summary of Contents for 2015 4Runner













































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands

Toyota 2015 4Runner, Service Manual

Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands