Toyota 2015 4Runner Service Manual Download Page 158

Page: 158 / 524

158

4RUNNER (U)_(OM35B18U)

4-1. Before driving



P. 194

With the brake pedal depressed, shift the shift lever to D. (



P. 199)

Release the parking brake. (



P. 203)

Gradually release the brake pedal and gently depress the accelera-
tor pedal to accelerate the vehicle.

With the shift lever in D, depress the brake pedal until the vehicle
comes to a stop.

If necessary, set the parking brake.

If the vehicle is to be stopped for an extended period of time, shift the shift
lever to P or N. (



P. 199)

With the shift lever in D, depress the brake pedal.

Set the parking brake. (



P. 203)

Shift the shift lever to P. (



P. 199)

If parking on a hill, block the wheels as needed.

Vehicles without a smart key system:
Turn the engine switch to the “LOCK” position to stop the engine.

Vehicles with a smart key system:
Press the engine switch to stop the engine.

Lock the door, making sure that you have the key on your person.

Driving the vehicle

The following procedures should be observed to ensure safe
driving:

Starting the engine

Driving

Stopping

Parking the vehicle

1
2
3

Summary of Contents for 2015 4Runner













































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands

Toyota 2015 4Runner, Service Manual

Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands