Toyota 2015 4Runner Service Manual Download Page 291

Page: 291 / 524

291

5-1. Using the air conditioning system and defogger

rior fe

atures

4RUNNER (U)_(OM35B18U)

Seat heaters



/seat ventilators



: If equipped

The seat heaters warm the seats and the seat ventilators main-
tain good airflow by blowing air through the seats.

CAUTION

●

Care should be taken to prevent injury if anyone in the following categories
comes in contact with the seats when the heater is on:

• Babies, small children, the elderly, the sick and the physically chal-

lenged

• Persons with sensitive skin
• Persons who are fatigued
• Persons who have taken alcohol or drugs that induce sleep (sleeping

drugs, cold remedies, etc.)

●

Observe the following precautions to prevent the minor burns or overheat-
ing

• Do not cover the seat with a blanket or cushion when using the seat

heater.

• Do not use seat heater more than necessary.

NOTICE

●

Do not put heavy objects that have an uneven surface on the seat and do
not stick sharp objects (needles, nails, etc.) into the seat.

●

To prevent battery discharge, do not use the functions when the engine is
off.

Summary of Contents for 2015 4Runner













































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands

Toyota 2015 4Runner, Service Manual

Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands