manualshive.com logo in svg

Toyota 2015 4Runner, Service Manual, Page: 421 / 524

Share
Download
Toyota 2015 4Runner Service Manual Download Page 421

421

7-2. Steps to take in an emergency

7

Wh

en tro

uble

 a

ris

es

4RUNNER (U)_(OM35B18U)

Master warning light

The master warning light also
comes on or flashes in order to
indicate that a message is cur-
rently being displayed on the multi-
information display.

Multi-information display

If any of the warning message or indicator comes on again after the
following actions have been performed, contact your Toyota dealer.

If a warning message or indicator is displayed

If a warning is shown on the multi-information display, stay calm
and perform the following actions:

1

2

Warning message and warning buzzer list

Warning message

Details/Actions

Indicates a malfunction in the steering lock sys-
tem

A buzzer also sounds.

Have the vehicle inspected by your Toyota
dealer.

Indicates a malfunction in the automatic transmis-
sion system

A buzzer also sounds.

Have the vehicle inspected by your Toyota
dealer.

Indicates that the automatic transmission fluid
temperature is too high

A buzzer also sounds.

Immediately stop the vehicle in a safe
place, shift the shift lever to P and wait until
the message goes off. If the message goes
off, you may start the vehicle again. If the
message does not go off, contact your
Toyota dealer.

Summary of Contents for 2015 4Runner













































































































































































































































































































































































































































































































































Reviews:

No comments