Toyota 2015 4Runner Service Manual Download Page 358

Page: 358 / 524

358

6-3. Do-it-yourself maintenance

4RUNNER (U)_(OM35B18U)

■

Fluid level

The fluid level should be within the appropriate range.

Full (when cold)

Add fluid (when cold)

Full (when hot)

Add fluid (when hot)

Hot: Vehicle has been driven around 50 mph (80 km/h) for 20 min-

utes, or slightly longer in frigid temperatures. (Fluid tempera-
ture, 140°F - 175°F [60°C - 80°C]).

Cold: Engine has not been run for about 5 hours. (Room tempera-

ture, 50°F - 85°F [10°C - 30°C]).

■

Checking the fluid level

Make sure to check the fluid type and prepare the necessary items.

Clean all dirt off the reservoir.

Remove the cap by turning it counterclockwise.

Wipe the dipstick clean.

Reinstall the cap and remove it again.

Check the fluid level.

Power steering fluid

1
2
3
4

Fluid type

Automatic transmission fluid DEXRON

II or III

Items

Rag or paper, clean funnel (only for adding fluid)

1
2
3
4
5

Summary of Contents for 2015 4Runner













































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands

Toyota 2015 4Runner, Service Manual

Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands