Toyota 2015 4Runner Service Manual Download Page 250

Page: 250 / 524

250

4-5. Using the driving support systems

4RUNNER (U)_(OM35B18U)

■

Speed modes

The following table shows
some typical terrains and the
recommended speed modes.

■

Crawl Control can be operated when

●

The engine is running.

●

The shift lever is in any position other than P or N.

●

The front-wheel drive control lever or switch is in L4.

●

The driver’s door is closed.

■

Crawl Control is temporarily canceled when

Vehicle speed exceeds 15 mph (25 km/h). The Crawl Control indicator
flashes until the vehicle speed is reduced.

Mode

Road condition

L (Low)

Rock, mogul (downhill) and gravel
(downhill)

Between L and M

Mogul (uphill)

M (Medium)

Snow, mud, gravel (uphill), sand, dirt,
mogul (uphill) and grass

Between M and H

H (High)

Summary of Contents for 2015 4Runner













































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands

Toyota 2015 4Runner, Service Manual

Search results

Summary of Contents for 2015 4Runner

Reviews:

Related manuals for 2015 4Runner

Brands by name

Popular brands