Toyota 2015 4Runner Service Manual Download Page 364

Page: 364 / 524

364

6-3. Do-it-yourself maintenance

4RUNNER (U)_(OM35B18U)

New tread

Treadwear indicator

Worn tread

The location of treadwear indica-
tors is shown by the “TWI” or “



”

marks, etc., molded on the side-
wall of each tire.

Check spare tire condition and
pressure if not rotated.



Vehicles without P245/60R20 tires

Rotate the tires in the order
shown.

To equalize tire wear and extend
tire life, Toyota recommends that
tire rotation is carried out at the
same interval as tire inspection.



Vehicles with P245/60R20 tires

Rotate the tires in the order
shown.

To equalize tire wear and extend
tire life, Toyota recommends that
tire rotation is carried out at the
same interval as tire inspection.

Tires

Replace or rotate tires in accordance with maintenance sched-
ules and treadwear.

Checking tires

1
2
3

Tire rotation

Front

Summary of Contents for 2015 4Runner













































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 4Runner

Reviews:

Toyota 2015 4Runner, Service Manual, Page: 364 / 524

Search results

Summary of Contents for 2015 4Runner

Reviews: