Toyota 2013 Tacoma Page 94 Owner'S Manual Download

Page: 94 / 484

118

1-7. Safety information

Run  the  seat  belt  through  the
child  seat  and  insert  the  plate
into  the  buckle.  Make  sure  that
the belt is not twisted.

Fully  extend  the  shoulder  belt
and  then  allow  it  to  retract
slightly  in  order  to  activate  the
ALR lock mode.

Lock mode allows the seat belt to
retract only.

While pushing the child seat
down into the rear seat, allow the
shoulder belt to retract until the
child seat is securely in place.

After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.

■

Forward-facing

⎯

Convertible seat

Place the child seat on the seat
facing the front of the vehicle.

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands