Toyota 2013 Tacoma Owner'S Manual Download Page 29

Page: 29 / 484

1-3. Adjustable components (seats, mirrors, steering wheel)

Before

driving

Double Cab models

The seatback of the rear seat can be folded.

■

Before folding rear seats

Stow the rear seat belt buck-
les.

This prevents the seat belt
buckles from falling out when
you fold the seatback.

Pass the seat belts through
the seat belt hangers.

This prevents the shoulder belt
from being damaged.

Make sure that the seat belts
are removed from the hangers
before using them.

■

Folding rear seats

Remove the head restraint
Swing the bottom cushion
up by pulling the lock
release strap

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Brands by name

Popular brands