Toyota 2013 Tacoma Owner'S Manual Download

Page: 100 / 484

124

1-7. Safety information

Replace the head restraint.

Child restraint systems with a top tether strap (Access Cab models)

Remove the anchor bracket cov-
ers.

Store the removed covers in a
safe place such as the glove box.

Secure the child restraint using a seat belt or lower anchors.

Route the top tether strap
through the routing device as
shown in the illustration.

Make sure the top tether strap is
not twisted.

Latch the hook onto the
anchor bracket and tighten the
top tether strap.

Make sure the top tether strap is
securely latched.

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands