Toyota 2013 Tacoma Owner'S Manual Download Page 36

Page: 36 / 484

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

■

Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.

●

Use the head restraints designed for each respective seat.

●

Adjust the head restraints to the correct position at all times.

●

After adjusting the head restraints, push down on them and make sure
they are locked in position.

●

Do not drive with the head restraints removed.

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Brands by name

Popular brands