manualshive.com logo in svg

Toyota 2013 Tacoma, Owner'S Manual

Share
Download
Toyota 2013 Tacoma Owner'S Manual Download Page 232

258

3-2. Using the audio system

NOTICE

■

To avoid damaging the antenna

Remove the antenna in the following situations.

●

When using an automatic carwash.

●

When the antenna will touch the ceiling of a garage, etc.

●

When covering the vehicle with a car cover.

■

Removing the antenna

●

For normal driving, make sure the antenna is installed.

●

When removing the antenna to use an automatic carwash, etc., be careful
not to  lose the  antenna. Also, make  sure to  reinstall  the  antenna  before
driving the vehicle.

■

Using the wrench

●

When  installing  or  removing  the  antenna,  use  the  included  wrench  or  a
standard 5/16 in. (8 mm) wrench.

●

Be careful not to scratch or damage the vehicle body with the wrench.

●

Do not over-tighten the antenna.
Over-tightening may damage the antenna.

●

Do not use pliers to install or remove the antenna.
Pliers may damage the antenna’s finish.

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands