Toyota 2013 Tacoma Owner'S Manual Download Page 393

Page: 393 / 484

Wh
e

n t

ble

ris

421

5-2. Steps to take in an emergency

Slightly loosen the wheel nuts
(one turn).

Assemble the jack handle exten-
sion as shown.

Position the jack at the correct
jack point as shown.

Front
Rear

Make sure the jack is positioned
on a level and solid place.

Raise the vehicle until the tire is
slightly raised off the ground.

When positioning the jack under
the  rear  axle  housing,  make
sure  the  groove  on  the  top  of
the  jack  fits  with  the  rear  axle
housing.

Front

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Brands by name

Popular brands