Toyota 2013 Tacoma Owner'S Manual Download

Page: 22 / 484

1-2. Opening, closing and locking the doors

NOTICE

■

To prevent damage to the tailgate wire harness (vehicles with rear view
monitor system)

Do not pull out all of the tailgate wire harness before open the tailgate.

■

To prevent damage to the camera lens (vehicles with rear view monitor
system)

Store the removed tailgate with the back-up camera lens facing upward.

■

After closing the tailgate

Try pulling it toward you to make sure it is securely locked.

■

To prevent damage to the rear step bumper

Do not allow more than one person to get on the rear step bumper at a time.

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands