Toyota 2013 Tacoma Owner'S Manual Download

Page: 95 / 484

119

1-7. Safety information

Before

driving

Run  the  seat  belt  through  the
child  seat  and  insert  the  plate
into  the  buckle.  Make  sure  that
the belt is not twisted.

Fully  extend  the  shoulder  belt
and  then  allow  it  to  retract
slightly  in  order  to  activate  the
ALR lock mode.

Lock mode allows the seat belt to
retract only.

While pushing the child seat into
the seat, allow the shoulder belt
to retract until the child seat is
securely in place.

After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.

If the child restraint has a top tether strap, the top tether strap
should be latched onto the top tether strap anchor.
(

→

P. 121, 124, 125)

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands