Toyota 2013 Tacoma Page 231 Owner'S Manual Download

Page: 231 / 484

257

3-2. Using the audio system

rio

r a

rior
fe

■

About the wrench

●

A standard 5/16 in. (8 mm) wrench can also be used to install or remove
the antenna.

●

After using the included wrench, store it in the glove box for safekeeping.

■

Installing the antenna

Tighten the antenna by one
hand until it will not turn any
more.

Using  the  wrench,  tighten  the
antenna  an  additional  1/8th
turn  (20  to  45  degrees)  to
secure it in place.

After tightening the antenna,
remove the wrench.

Summary of Contents for 2013 Tacoma





































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands

Toyota 2013 Tacoma, Owner'S Manual

Search results

Summary of Contents for 2013 Tacoma

Reviews:

Related manuals for 2013 Tacoma

Brands by name

Popular brands