196
2-4. Using other driving systems
■
Operating tips
The system will operate when the shift lever is in a position other than P.
However, to make effective use of the system it is recommended that the
shift lever be shifted to 2 or L.
■
The system will not operate when
●
The front-wheel drive control switch is in the H2 or H4 position.
●
The rear differential is locked.
■
The downhill assist control system indicator light flashes when
●
The shift lever is in the N position.
●
The front-wheel drive control switch is in the H2 or H4 position.
●
The rear differential is locked.
■
If the brake system overheats
The system will cease operation and a buzzer will sound to alert the driver.
Stop the vehicle in a safe place. (There is no problem with continuing normal
driving.)
■
System malfunction
●
The downhill assist control system indicator does not come on when the
engine switch is turned to the ON position.
●
The downhill assist control system indicator does not come on when the
DAC switch is pressed.
In the above cases have your vehicle checked by your Toyota dealer.
CAUTION
■
Do not rely excessively on the downhill assist control system
It may not be able to maintain a low speed over road surfaces on which slid-
ing can easily occur, such as extremely steep slopes or icy or muddy roads.
Summary of Contents for 2013 Tacoma
