Toyota 2005 HIGHLANDER Owner'S Manual Download Page 87

Page: 87 / 430

’05 HIGHLANDER_U (L/O 0409)

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

CAUTION

Make sure the both buckles are cor-
rectly located and securely latched.

Failure to properly match the buckle

and tab may cause severe injury in
case of an accident or a collision.

To release the concave end tab, insert the

key into the hole on buckle 1 and allow
the belt to retract.

CAUTION

Do not use the third seat seat belt
with either buckle released. Fastening

only the shoulder belt or lap belt may

cause severe personal injury in case
of sudden braking or a collision.

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands