Toyota 2005 HIGHLANDER Owner'S Manual Download Page 40

Page: 40 / 430

’05 HIGHLANDER_U (L/O 0409)

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

Do not bend the key grip.

Do not cover the key grip with any
material that cuts off electromagnet-

ic waves.

Do not knock the key hard against
other objects.

Do not leave the key exposed to
high temperatures for a long period,

such as on the dashboard and hood

under direct sunlight.

Do not put the key in water or

wash it in an ultrasonic washer.

Do not use the key with electromag-

netic materials.

KEY NUMBER PLATE
Your key number is shown on the plate.
Keep the plate in a safe place such as

your wallet, not in the vehicle.

If you should lose your keys or if you

need additional keys, duplicates can be

made by a Toyota dealer using the key
number.
We recommend writing down the key num-
ber and storing it in a safe place.

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands