Toyota 2005 HIGHLANDER Owner'S Manual Download Page 224

Page: 224 / 430

’05 HIGHLANDER_U (L/O 0409)

200

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

To turn off the system, push the “OFF”
button.

When the front audio system is turned off,
the rear audio system and the DVD player
will be turned off simultaneously.

All the modes of the front audio system
can be operated on the rear seat enter-
tainment system.

When the same mode is selected on the
front and rear audio systems simulta-
neously, the system can be operated on
the front audio system.

If the radio mode is selected on the front
and rear audio systems at the same time,
AM and FM modes cannot be changed on
the rear seat audio system.

Controller

DVD player unit

—Front audio system
operation

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands