Toyota 2005 HIGHLANDER Owner'S Manual Download Page 344

Page: 344 / 430

’05 HIGHLANDER_U (L/O 0409)

344

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

CAUTION

Never use oil or grease on the
bolts or nuts. The nuts may loose
and the wheels may fall off,
which could cause a serious ac-
cident.

5. Position the jack at the correct

jack point as shown.

Make sure the jack is positioned on

a level and solid place.

6. After making sure that no one

is in the vehicle, raise it high
enough so that the spare tire
can be installed.

Remember you will need more ground

clearance when putting on the spare

tire than when removing the flat tire.
To raise the vehicle, insert the jack

handle into the jack (it is a loose fit)

and turn it clockwise. As the jack

touches the vehicle and begins to lift,

double

−

check that it is properly posi-

tioned.

—Positioning the jack

—Raising your vehicle

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands