Toyota 2005 HIGHLANDER Owner'S Manual Download Page 61

Page: 61 / 430

’05 HIGHLANDER_U (L/O 0409)

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

When you quickly push and release the

switch, the moon roof will tilt down while

the switch is depressed and stop when
released.

Key off operation:

If all the side doors

and back door are closed, it works for 43
seconds even after the ignition switch is

turned off. It stops working when either

front door is opened.

Jam protection function:

If something gets caught between the
moon roof and frame during slide clos-

ing operation, the moon roof stops and

then opens slightly.

If something gets caught between the

moon roof and frame during tilting
down operation, the moon roof stops

and then tilts up fully.

If the moon roof receives a strong impact,

this function may work even if nothing is

caught.

If the moon roof does not operate auto-

matically or the jam protection function

does not operate correctly, you should
normalize the moon roof.

To normalize the moon roof, push and

hold the switch toward the “TILT UP” side.
The moon roof will tilt up and down, then

slide open and close. After the slide close

operation, release the switch.
Make sure that the moon roof opens and

closes automatically. If the moon roof can-
not be operated properly, have it checked

by your Toyota dealer.

CAUTION

To avoid serious personal injury, you
must do the following.

While the vehicle is moving, always

keep the heads, hands and other
parts of the bodies of all occupants

away from the roof opening. Other-

wise, they could be seriously in-
jured if the vehicle stops suddenly

or if the vehicle is involved in an

accident.

Before you close the moon roof,

always make sure there is nobody
around the moon roof. You must

also make sure nobody places his

or her head, hands and other parts
of the body in the roof opening. If

someone’s neck, head or hands get

caught in the closing roof, it could
result in death or serious injury.

When anyone closes the moon roof,

first make sure it is safe to do so.

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands