Toyota 2005 HIGHLANDER Owner'S Manual Download Page 66

Page: 66 / 430

’05 HIGHLANDER_U (L/O 0409)

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

While adjusting the seat, do not put
your hands under the seat or near

the moving parts. Otherwise, your

hands or fingers may be caught and
injured.

1. SEAT POSITION ADJUSTING LEVER

Hold the center of the lever and pull it

up. Then slide the seat to the desired
position with slight body pressure and

release the lever.

2. SEAT CUSHION ANGLE ADJUSTING

KNOB

To change the angle of the seat cush-
ion on the front side, turn the knob

either way.

3. SEAT HEIGHT ADJUSTING LEVER

To change the height of the seat, pull

up or push down the lever.

4. SEATBACK ANGLE ADJUSTING

LEVER

Lean forward and pull the lever up.

Then lean back to the desired angle
and release the lever.

—Adjusting front seats

(manual seat)

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands