Toyota 2005 HIGHLANDER Owner'S Manual Download Page 174

Page: 174 / 430

’05 HIGHLANDER_U (L/O 0409)

150

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

CAUTION

Never attempt to move the selector
lever into “P” position under any cir-

cumstances while the vehicle is mov-

ing. Serious mechanical damage and
loss of vehicle control may result.

(h) Good driving practice

If the transmission repeatedly shifts up

and down between third gear and over-

drive when climbing a gentle slope, the
overdrive switch should be turned off.

Be sure to turn the switch on immedi-

ately afterward.

When towing a trailer, in order to main-

tain engine braking efficiency, do not

use overdrive.

CAUTION

Always keep your foot on the brake
pedal while stopped with the engine

running. This prevents the vehicle

from creeping.

NOTICE

Always use the brake pedal or the
parking brake to hold the vehicle on

an upgrade. Do not attempt to hold

the vehicle using the accelerator ped-
al, as this can cause the transmission

to overheat.

(i) Driving in snow mode

Use this mode when starting your vehicle
in ice or snow.
To set the driving pattern to the snow
mode, push the switch. The “ECT SNOW”

indicator on the instrument cluster is on.

To cancel the snow mode, push the switch
again.
If the engine is turned off with the snow
mode is on, the snow mode is cancelled

when the engine is restarted.

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands