Toyota 2005 HIGHLANDER Owner'S Manual Download Page 62

Page: 62 / 430

’05 HIGHLANDER_U (L/O 0409)

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

Be sure to remove the ignition key
when you leave your vehicle.

Never leave anyone (particularly a

small child) alone in your vehicle,
especially with the ignition key still

inserted. Otherwise, he/she could

use the moon roof switch and get
trapped in the roof opening. Unat-

tended person (particularly a small

child) can be involved in a serious
accident.

Never sit on top of the vehicle
around the roof opening.

Never try jamming any part of your
body to activate the jam protection

function intentionally.

The jam protection function may
not work if something gets caught

just before the moon roof is fully

closed.

Summary of Contents for 2005 HIGHLANDER















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands