Toyota 2005 4Runner Navi_U Operating Manual Download Page 103

Page: 103 / 135

ADVANCED FUNCTIONS

05 4RUNNER NAVI_U (L/O 0408)

3. Touch the desired color for day and/or
night map and then touch the

“OK”

switch to return the map screen.

Touch the

“Normal”

switch to return to the

default map color.

Screen animation

When the “Screen Animation” feature is
turned on, some switches and screens be-
come animated. (e.g.: change map guid-
ance on the map screen)

To turn the “Screen Animation” mode on:

1. Push the

“MENU”

button.

2. Touch the

“Setup”

switch. Then

touch

switch three times to display

page 4 of the “Setup” screen.

3. Touch the

“On”

switch of “Screen

Animation” and touch the

“OK”

switch.

Summary of Contents for 2005 4Runner Navi_U








































































































































Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands

Toyota 2005 4Runner Navi_U, Operating Manual

Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands