Toyota 2005 4Runner Navi_U Operating Manual Download Page 17

Page: 17 / 135

BASIC FUNCTIONS

05 4RUNNER NAVI_U (L/O 0408)

The registered point is shown by on the
map.

To change the icon or name, etc., see page
68.

You can register up to 106 memory points. If
you attempt to register more than 106, a mes-
sage appears for confirmation.

To see information about the icon
where the cursor is set

To display information about an icon, set the
cursor on it.

POI INFORMATION

When the cursor is set on a POI icon, the
name and

“Info.”

switch are displayed on

the top of the screen.

Touch the

“Info.”

switch.

Information such as the name, address, and
phone number are displayed.

If you touch the

“Enter ”

switch, the posi-

tion of cursor is set as a destination.

If there is already a preset destination, the

“Add to ”

switch and the

“Replace

”

switch are displayed.

When there is already a preset destination,
using the

“Add to ”

switch to set an addi-

tional destination, will set the new one as the
first point of arrival.

To register this POI as a memory point, touch
the

“Mark”

switch. (For details, see page

66.)

Summary of Contents for 2005 4Runner Navi_U








































































































































Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands

Toyota 2005 4Runner Navi_U, Operating Manual

Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands