Toyota 2005 4Runner Navi_U Operating Manual Download Page 85

Page: 85 / 135

ADVANCED FUNCTIONS

05 4RUNNER NAVI_U (L/O 0408)

To change “Name”

Touch alphabet or numeral keys.

When the entry has been completed, touch
the

“OK”

switch on the screen.

The previous screen will be displayed.

“Show Name”

The avoid area name can be set to be dis-
played or not on the map. To show the
name, touch the

“On”

switch. Not to

show it, touch the

“Off”

switch.

To change “Location”

Set the cursor

to the desired location, then

touch the

“Enter”

switch. The previous

screen will be displayed.

To change “Area size”

Touch either

switch to change

the size of area you want to avoid, and touch
the

“OK”

switch. The previous screen will

be displayed.

Summary of Contents for 2005 4Runner Navi_U








































































































































Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands

Toyota 2005 4Runner Navi_U, Operating Manual

Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands