Toyota 2005 4Runner Navi_U Operating Manual Download Page 66

Page: 66 / 135

DESTINATION INPUT AND ROUTE GUIDANCE

05 4RUNNER NAVI_U (L/O 0408)

INFORMATION

When you drive on a freeway, the screen
is automatically divided into two parts,
with freeway information screen on the
right side.

(g) Intersection guidance
screen/guidance screen on
freeway

Intersection guidance screen

This screen automatically appears when the
vehicle approaches an intersection on the
road.

The distance to the intersection is shown at
the bottom of the screen.

“

OFF”: The intersection guidance screen

disappears and the map screen appears.

When touching the

switch or pushing

the

“MAP/VOICE”

button, the intersec-

tion guidance screen reappears.

INFORMATION

Intersection guidance can be turned on
or off. (See page 85.)

Guidance screen on freeway

This screen automatically appears when the
vehicle approaches a junction or exit on a
freeway.

The distance to the junction or exit is shown
at the bottom of the screen.

“

OFF”: The guidance screen on freeway

disappears and the map screen appears.

When touching the

switch or pushing

the

“MAP/VOICE”

button, the guidance

screen on freeway reappears.

INFORMATION

Guidance screen on freeway can be
turned on or off. (See page 86.)

Summary of Contents for 2005 4Runner Navi_U








































































































































Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands

Toyota 2005 4Runner Navi_U, Operating Manual

Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands