Toyota 2005 4Runner Navi_U Operating Manual Download Page 27

Page: 27 / 135

BASIC FUNCTIONS

05 4RUNNER NAVI_U (L/O 0408)

The map database is normally updated once
a year. Contact your dealer for information
about the availability and pricing of an update.

To confirm the database version and
disc coverage area

1. Push the

“MENU”

button.

2. Touch the

“Map DVD”

switch.

Make sure the version of the database on this
screen. (The database version on the screen
above may be different from the actual
screen.)

To display the disc coverage area, touch the

“Covered Area”

switch. Confirm the

covered area on the screen.

Contact your dealer to find out if there is a
more recent update released.

Summary of Contents for 2005 4Runner Navi_U








































































































































Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands

Toyota 2005 4Runner Navi_U, Operating Manual

Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands