Toyota 2005 4Runner Navi_U Operating Manual Download Page 56

Page: 56 / 135

DESTINATION INPUT AND ROUTE GUIDANCE

05 4RUNNER NAVI_U (L/O 0408)

“Delete All”: To delete all the listed preferred
road.

4. A message appears to confirm your re-
quest to delete. To delete the preferred
road, touch the

“Yes”

switch.

If you touch the

“Yes”

switch, the data can-

not be recovered.

If you want to try again or cancel deletion,
touch the

“No”

switch. The previous screen

will return.

5. If more than one preferred road is set,
touch the

“OK”

switch after deleting the

preferred road. The system searches for
the guidance route again, and displays en-
tire route.

(c) Search condition

You can designate the route conditions of
the route to the destination.

1. Touch the

“Route”

switch.

2. Touch the

“Search Condition”

switch. The “Search Condition” screen
appears.

3. Touch the

“Quick”

“Quick1”

“Quick2”

“Short”

switch and touch

the

“OK”

switch.

The entire route from the starting point to the
destination is displayed.

“Guide”: To start guidance.

“Route”: To add or change a route. (For de-
tails, see pages 42 and 44.)

Summary of Contents for 2005 4Runner Navi_U








































































































































Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands

Toyota 2005 4Runner Navi_U, Operating Manual

Search results

Summary of Contents for 2005 4Runner Navi_U

Reviews:

Related manuals for 2005 4Runner Navi_U

Brands by name

Popular brands