Date:
______________________
By / Par:
___________________
LP GAS/
DU GAZ LP
12.5 in/wc /12.5 po/c.e.
(3.11 kPa)
13.9 in/wc / 13.9 po/c.e.
(3.45 kPa)
10.0 in/wc / 10.0 po/c.e.
(2.49 kPa)
1.78 mm
Max.: 62,000Btu (18.1kw)
Min.: 49,000Btu (14.3kw)
071014 6-TCWS54ST_D 5052.52089D
Kit # TCWS54ST_D.LP for use with model:
Pour utilise avec du modèle:
TCWS54ST
Series D
This appliance was converted
t o P R O PA N E G A S w i t h
this kit on this date by the
organization which accepts
the responsibility that this
conversion has been properly
made. / Cet appariel etair
converter au gaz LP par l’emploi
de la trousse de conversion par
une organization qui accepte
la responsibilité pour une
installation en bon état.
100001140
For complete valve conversion installation instructions, refer
to the instruction book included in the SIT conversion kit.
Update the LP conversion sticker after conversion is finished
7.
Slide the pilot adjustment band
over and ensure that the hole in
the orifice band is showing.
Figure 70 shows NG position
Figure 71 shows LP position.
8.
Fill in the date and the name of
the person who performed the
conversion in the white area on
the conversion label (sample
below). Peel off the protective
backing and apply the conversion
label directly over the gas specifi-
cations on the rating label.
9.
Re-attach the access panel to
the floor of the firebox with the
screws previously removed then
replace the secondary floor and
install or reinstall the burners,
burner tray and media.
WARNING: Both the
control box shield and
the access panel must
be reinstalled after
conversion/ installation
or servicing has been
completed. Failure to
do so will overheat and
cause premature failure
of the control system.
NG POSITION
Figure 70: Pilot adjustment band in
natural gas position.
LP POSITION
Figure 71: Pilot adjustment band in
liquid propane position.
34
TCWS54STOK_270619-56
