Safety
barrier
screen
Glass
door
trim
Flanged
edge
Hemmed
edge
Figure 22: Lintel and trim.
Lintel securing bolt
Figure 23: Upper left securing bolt.
Lintel Adjustment
1. The adjustable lintel assembly
has two orientations for
desired finishing. The flanged
edge and the hemmed edge
(Figure 22). The lintel comes
factory installed with the flange
edge out . If the desired edge
is different from the factory
setting, use the following
steps to change it.
2. Remove safety barrier screen.
3. Remove the door trim from the
door frame.
4. Loosen the securing bolts in
the upper and lower corners
on each side of the lintel
(Figure 23) and remove the
lintel. Rotate the assembly to
have the desired edge away
from the fireplace.
5. The lintel assembly can then
be adjusted to align flush with
your facing material by sliding
in or out approximately 1”.
6. Tighten the securing bolts .
7. Re-attach the door trim.
8. Reinstall safety barrier screen.
Lintel securing bolt
Figure 24: Lower right securing bolt.
100001140
16
TCWS54STOK_270619-56
