- 24 -
tousek
/ E_ST61_07 / 06. 06. 2019
Important: preparation works
• Connect control panels, safety devices to the motor under the safety regulations in .
Attention: if no stop switch is connected then the terminals 30/31 have to be bridged.
•
The mechanical limits have to be placed so that contact edges are not triggered, as this would lead to an
error message
• Unlock emergency release of operator and set gate to half-opened position. Then lock the operator again
• Then turn on the operator (correct connection necessary).
•
Important:
Putting into operation in Impulse mode (standard setting) and not in dead man mode.
• During initial operation the choice of language and operator (SWING X or SPIN 250) is made first, then in the “Basic
settings” the adjustment of most important operator settings and after the system test, the automatic detection of limit
positions of gate is made.
6. Putting into operation
Swing gate control unit ST 61
LANGUAGE SELECTION
•
Can be selected during initial operation (hence after reset to factory settings).
•
Can be also chosen by pressing the ESC button
(
)
for 5s, from any position in menu.
BASIC SETTING
•
For setting the most important adjustments for initial operation of motor.
•
Can be selected during initial operation (hence when restoring the factory setting).
•
All safety devices are activated when leaving factory
(menu
page 7).
•
The next programming adjustments are made in the main settings menu
(see
6–7).
factory settings
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
impulse button
3
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
OPEN-STOP-CLOSE
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
OPEN-CLOSE-OPEN
change ? YES
confirm
3
4
OPEN
STOP
CLOSE
Select a setting (+/-):
OPEN/STOP/CLOSE
OPEN/CLOSE/OPEN
OPEN
DEADMAN
OPEN
CLOSE
OPEN
e.g.
return
to previous location
putting into operation
(same step after
factory reset)
5s ESC
(language selection)
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Sprache-language
Deutsch
1
confirm
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
Sprache-language
English
scroll
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
basic settings
confirmation
3
2
SWING X
SPIN 250
change operator
confirm
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
operator
SWING X
$$$$$$$$$$$$$$$$
$$$$$$$$$$$$$$$$
operator
SPIN 250
2
OK
