Page 1
Page 2
PARTS LIST
INFORMATION
Part Number
Description
Qty
7900-092
Eccentric Eliminator Plate
4
x
Our Eccentric Eliminators’ three-hole design provides 11
different mounting positions for the lower control arm,
with a total camber adjustment range of 5 degrees.
x
Each position is equal to roughly 1/2 degree of
movement.
Orientation of rack-&-pinion
mounting bracket will differ by
application.
x
The bolt must pass through the same hole of the fore
and aft eliminator plates.
x
The eliminator plates must have matching orientation.
x
Negative camber will need to be initially set toward the
negative side of the intended adjustment spec.
o
Example: Desired -1.5°, Initial Setting -2°
x
TCP adjustable upper control arms or adjustment shims
will be needed to make precise alignment settings.
x
The split collar clamp for the rack-&-pinion is left loose to
allow the clamp assembly to slide along the rack tube
(not pictured).
x
Tighten split collar clamp when initial camber setting has
been achieved.
x
Torque 1/2” Lower Control Arm bolts to 65 lb.ft.
Additional hardware shown is included with the TCP Rack-&-
Pinion and TCP Lower Control Arms.
Summary of Contents for RCKP214
