Total Control Products RCKP214, Installaton Manual

Page: 2 / 41

1
INSTALLATION GUIDE
TCP RCKP-01
Power Rack & Pinion, Left-Hand Drive
1967-1970 Mustang/Cougar
FE or Big-Block Engines
READ ALL INSTRUCTIONS COMPLETELY AND THOROUGHLY UNDERSTAND THEM BEFORE DOING ANYTHING.
CALL TOTAL CONTROL PRODUCTS TECH SUPPORT (916) 388-0288 IF YOU NEED ASSISTANCE.
Description: Power TCP Rack & Pinion with mounting brackets and hardware ONLY
Applications: Fits ‘67-70 Mustang/Cougar with FE or big-block V8 engines
Notes: The TCP Rack & Pinion has been engineered to work with the TCP power steering pump as a matched
system. Using an alternate pump is not recommended or supported and will not yield optimum results.
FLUID REQUIREMENT: The only medium recommended for use in our rack-and-pinion system is
petroleum (OIL). DO NOT USE SILICONE SYNTHETIC FLUID, any automatic transmission fl uid, or any
fl uid containing a “resealing” additive. Materials such as silicones, brake fl uids, water-or glycol-based
hydrostatic fl uids, and phosphate ester-based aviation hydraulic fl uids like Skydrol are incompatible with
the seals in the servo and cylinder and will cause them to swell, shrink, crack, or even dissolve. Damage
or leaks caused by use of these fl uids voids the manufacturer’s warranty.
If the label does not say “Contents: Petroleum Oil” do not use it.
Approved Fluids:
United
States - NAPA Brand – PSF 9832 (1 qt.), PSF 9801 (1 gal.), NHF 85401 (1 gal.)
Canada - NVO 15040 (10 liter) -
Europe - Pentosin CHF7.1 - 1404106 (BMW/Audi dealerships)