Total Control Products RCKP214, Installaton Manual

Page: 25 / 41

4
STEERING COLUMN PREPARATION
13. Measure, mark, and then cut the
steering column tube to an overall length
of 29-5/16”. A band saw or cut-off wheel
can be used.
14. Remove sharp edges with a file or
similar tool.
STEERING COLUMN ASSEMBLY
15. Slide the blue anodized split-collar
clamp over the bottom end of the
column tube; provided in TCP COLM-04
floor mount kit.
12. Remove the steering box from
underneath the car. It may be necessary
to remove the exhaust header or raise
the engine to make room for the steering
box to drop out.