Total Control Products RCKP214, Installaton Manual

Page: 24 / 41

3
5. Disconnect the turn signal harness from
underneath the dash.
6. Unbolt the firewall seal assembly. These
parts will be replaced with components
included in the TCP COLM-04 floor
mount kit.
7. Remove the two bolts holding the
steering column under dash bracket.
8. Remove the outer column tube from the
vehicle. The steering shaft will remain in
place for the time being.
STEERING BOX REMOVAL
9. Raise the vehicle using a lift or floor jack
and secure with jack stands.
10. Remove the center link from the pitman
arm of the steering box. A balljoint fork
or similar tool may be required.
11. Remove the three bolts attaching the
steering box to driver-side frame rail.